4 Rafailidou str, 17778 Athens Greece

YOUR ONLINE
MEASUREMENTS

  WATER TREATMENT   
ANTIFROZEN SUPER

PRODUCT DESCRIPTION
ANTIFROZEN SUPER is a special antifreeze product based on ethylene glycol. It also contains water hardness bindings, sequestrants, scale inhibitors and anticorrosive additives.
ANTIFROZEN SUPER is suitable for the cooling water systems such as diesel engines, internal combustion engines, car refrigerators, central heating, solar boilers etc. and generally, where a low freezing point is requested.
Furthermore with the water hardness bindings, sequestrants and scale inhibitors the formation of scale is avoided and as a result optimum system performance is maintained.

ADICO - NC - L

PRODUCT DESCRIPTION
ADICO-NC-L is a liquid, nitrite/borate based compound for scale and corrosion control in
closed recirculating cooling systems.
PRODUCT USES
Corrosion inhibiting treatment for closed recirculating systems such as:
* Diesel Engine cooling water systems
* Compressor cooling water systems
* Centralized cooling systems
* Central heating systems etc.
* Chilled water systems
* Transformer cooling systems

EUROSPERSE PLUS

PRODUCT DESCRIPTION
Condensers, seawater piping and inlet boxes are typical habitats of mussels, algae, microorganisms and shellfish that bring about a serious restriction to the flow of cooling water, as well as cause corrosion and eventually perforation of the tubes. EUROSPERSE
PLUS is a very effective amine-based dispersant in liquid form, which controls the unwanted marine growth and prevents fouling of seawater cooling systems. Thus, the system is able to transfer heat to the maximum. The product also acts as a corrosion inhibitor due to the formation of a molecular film. EUROSPERSE PLUS is water based and non-flammable. Its composition meets the criteria for not being harmful to the marine environment according to MARPOL Annex V
APPLICATION & DOSAGE
EUROSPERSE PLUS is suitable for use in both static and flowing systems, i.e. sea water systems, static ballast tanks, stability trimming tanks etc. Treatment should preferably be started with a clean system. It is not recommended for removing existing, settled shellfish. For this purpose, use SCALE REMOVER LIQUID.